MFT for Windows
version 0.961 - June 29, 2008

Driver versions:

   Windows XP 32-bit
   Windows 2003 32-bit
   Windows 2003 64-bit
   Windows Vista 32-bit
   Windows Vista 64-bit

Tested version:

This release has been tested with Windows XP and Windows Vista 64-bit only.
Other platforms will be field tested over the next several days.

It is likely that other platforms work fine, but you should only load
this sofeware on non-production systems.

Installing into a Volume:

In order to create an MFT managed volume, you need to create a partition
(this is called a volume in Vista/2008) on a Basic disk.  MFT does not
support Dynamic Disks.  When you create a partition, assign it a drive
letter, but leave it's format set to 'RAW'.  The partition will be
formatted NTFS or FAT32 when the MFT driver is attached and the
partition is logically formatted for MFT and mounted.

Installation and De-installation:

If you install MFT and then de-install it from a partition, please
reboot.  The driver has issues with starting and stopping.

Authorization Codes:

You will need an authorization code.  These codes are assigned by
EasyCo.  Both permanent (paid) and demo (free) codes are available.
Demo codes operate for 30 days.  Authorization codes limit the size
of SSD that can be used.

Max Size for 32-bit:

The MFT drives uses kernel memory to store mapping tables.  This is
about 0.12% of the drive's logical, mounted, size.  Thus for a 30GB
partition, MFT will need about 35 MB of page-locked kernel memory.
For partitions up to about 250 GB, this is fine with both 32 and 64
bit kernels.  If you are building a server with more than 250 GB of
SSD storage, you should use a 64 bit OS.